The hob is an essential part of your kitchen, and when it starts giving you problems, it can be very inconvenient. Whether you’re using a gas or electric hob, understanding the potential causes of common faults can help you troubleshoot and even fix minor issues. In this blog post, we will discuss common problems with hobs, including gas hobs not lighting, electric hobs not heating up, the inconsistent temperature on electric hobs, and maintenance tips.
If you need to test an electrical component when making your repairs, more often than not, you will need a multimeter. You can pick one up over on Amazon here!
Common Hob Issue 1. Gas Hob Won’t Light
If the flames from your gas hob look yellow or uneven, or if the flames look smaller than usual, this indicates that there is debris in the gas burners or jets. A technician should remove the burner assembly and inspect for blockages around the jet and the burner head. They should then clean these parts thoroughly with water and remove the grime. Do not attempt to clean the blockages with harsh chemicals or wires as you may enlarge the burner holes and worsen the problem.
If one of the cooking plates of your electric hob is not heating up, the cooking plate element may be faulty and you’ll need to call the appliance technician for a replacement. You could also experience problems with the cooking plates if you use pans with uneven bases, so replace old dented pans with new ones.
Common Hob Issue 3. Electric Hob’s Temperature Isn’t Consistent
If a burner turns on but the heat level can’t be adjusted (for example, it stays at a high temperature as long as it is switched on, no matter what you do with the settings), it could be the result of a faulty ignition switch. To determine if the problem is with the switch itself, turn off all switches, unplug the burner and fit it into a different receptacle. Turn on the cooker and try adjusting the switch on that burner to see if it works. Any faulty switches should be replaced.
Regular cleaning and maintenance of your hob can prevent many common issues and extend the life of your appliance. Here are some tips:
Clean the Burners: Remove the burner caps and wipe the rings clean. Use a special cloth that is not going to leave fibres or lint behind.
Dry Properly: Make sure you dry the rings and hob properly when you clean it because any remaining moisture could cause incessant clicking when you switch it on.
Use the Right Pans: For induction hobs, only pans made from ferrous material will work on them (ferrous means the material includes iron). To check if your pan is composed of ferrous material, hold a fridge magnet to its bottom and see if it sticks.
Avoid Abrasive Cleaners: If you have a ceramic or gas-on-glass hob, use a special cream-based hob cleaner to avoid scratching the surface.
Help With Common Hob Issue From Yorkshire Appliances
In conclusion, understanding common hob issues and how to troubleshoot them can save you time and money. Regular maintenance can also prevent many of these problems from occurring in the first place. For more information on appliance repairs and maintenance, check out our other blog posts on Yorkshire Appliances. If you need professional assistance, don’t hesitate to contact us.
Note: Always remember to disconnect the power before attempting any repairs or maintenance on your appliances. If you’re unsure about any of the steps outlined above, it’s best to seek professional help.
Happy DIY’ING
As an Amazon Associate, I earn from qualifying purchases. The links provided in this article are affiliate links, which means I may receive a commission if you make a purchase through these links. You are under no obligation to use these links when making a purchase.
