Search
Tumble Dryer Won't Turn

Tumble Dryer Won’t Turn

When your tumble dryer won’t turn, it can be a frustrating experience. But don’t worry, this comprehensive guide will walk you through the common causes and solutions to this problem. Remember, it’s always important to disconnect your appliance from the power source before you start any repair.

Broken Drive Belt

One of the most common reasons why a tumble dryer won’t turn is a broken drive belt. The drive belt is a long, thin band that wraps around the dryer drum, the tension pulley, and the drive motor pulley. Over time, the belt can wear out and eventually snap, causing the drum to stop turning.

How to Fix:

  1. Unplug your tumble dryer from the power source.
  2. Remove the back panel of the dryer to expose the belt. This usually involves unscrewing several screws around the edge of the back panel.
  3. Check the belt. If it’s broken, you’ll need to replace it. You can purchase a replacement drive belt from a trusted retailer. Or from Amazon here.
  4. To replace the belt, remove the old one by pulling it off the pulleys. You may need to use a screwdriver to help pry it off.
  5. Loop the new belt onto the motor pulley and then around the tension pulley in a zig-zag formation. Make sure the belt is positioned correctly and is tight on the pulleys.
  6. Replace the back panel and plug the dryer back in. Test the dryer to ensure it’s working correctly.
https://www.youtube.com/watch?v=snWjzoV6HjI&t=286s

Faulty Motor

If the drive belt is intact, the problem could be the motor. The motor is what turns the drum. If it’s faulty, the drum won’t turn.

How to Fix:

  1. Unplug your tumble dryer.
  2. Access the motor by removing the back panel. This usually involves unscrewing several screws around the edge of the back panel.
  3. Inspect the motor for any visible signs of damage. If it’s visibly damaged or burnt out, you’ll need to replace it.
  4. If there’s no visible damage, you can use a multimeter to test the motor for continuity. If the motor doesn’t have continuity, it’s faulty and needs to be replaced.
  5. Replace the motor with a new one, following the manufacturer’s instructions. This usually involves disconnecting the old motor, removing it from the dryer, and then installing the new motor.
  6. Replace the back panel and plug the dryer back in. Test the dryer to ensure it’s working correctly.

Damaged Start Switch

The start switch is what signals the motor to start when you press the start button. If it’s damaged, the motor won’t start, and the drum won’t turn.

How to Fix:

  1. Unplug your tumble dryer.
  2. Locate the start switch. It’s usually located behind the start button on the control panel. You may need to remove the control panel to access the start switch.
  3. Use a multimeter to test the start switch for continuity. If it doesn’t have continuity, it’s faulty and needs to be replaced.
  4. Replace the faulty start switch with a new one, following the manufacturer’s instructions. This usually involves disconnecting the old switch, removing it from the control panel, and then installing the new switch.
  5. Replace the control panel and plug the dryer back in. Test the dryer to ensure it’s working correctly.

Worn Out Drum Rollers

Some dryers use rollers to support the drum. If these rollers are worn out, they might not spin freely, causing the drum to stop turning.

How to Fix:

  1. Unplug your tumble dryer.
  2. Access the drum rollers by removing the front panel of your dryer. This usually involves unscrewing several screws around the edge of the front panel.
  3. Inspect the rollers. If they’re worn out or don’t spin freely, you’ll need to replace them.
  4. Replace the faulty drum rollers with new ones, following the manufacturer’s instructions. This usually involves removing the old rollers and then installing the new ones.
  5. Replace the front panel and plug the dryer back in. Test the dryer to ensure it’s working correctly.

Yorkshire Appliances

Remember, if you’re not comfortable doing these repairs yourself, it’s always best to call a professional. If you’re in the West Yorkshire area, consider reaching out to Yorkshire Appliances for your repair needs. They’re a reputable family-run business with years of experience in appliance repair.

Yorkshire Appliances is a family-run business based in Shipley, West Yorkshire. They specialize in appliance repairs and have a team of experienced engineers who can help with any appliance issues you might have. They offer a fast, reliable service and pride themselves on their customer satisfaction. Whether it’s a tumble dryer that won’t turn or a washing machine that won’t drain, Yorkshire Appliances has got you covered.

In the next blog post, we’ll be discussing what to do when your tumble dryer won’t start. Stay tuned!

Contact us if you need professional help with your appliance repairs. We’re always here to help.

As Amazon Associates, we earn from qualifying purchases. The links provided in this article are affiliate links, which means we may receive a commission if you make a purchase through these links. You are under no obligation to use these links when making a purchase.

Yapp

Tumble Dryer Won’t Turn Tumble Dryer Won’t Turn Tumble Dryer Won’t Turn Tumble Dryer Won’t Turn Tumble Dryer Won’t Turn Tumble Dryer Won’t Turn Tumble Dryer Won’t Turn Tumble Dryer Won’t Turn

Leave a Reply

Your email address will not be published. Required fields are marked *