Vacuum Cleaner Has No Suction
A vacuum cleaner is a household essential that we often take for granted until it stops working properly. One of the most common issues that can occur with a vacuum cleaner is a loss of suction. This can be incredibly frustrating, especially when you’re in the middle of cleaning. In this comprehensive guide, we will explore the possible reasons why your vacuum cleaner has no suction and provide step-by-step instructions on how to fix them.
1. Empty the Dust Bag or Container
One of the most common reasons for a vacuum cleaner losing its suction is a full or nearly full dust bag or container. When the bag or container is full, the vacuum cleaner can’t take in any more air, which drastically reduces its suction power.
How to Fix:
- First, check the dust bag or container. If it’s full, you’ll need to empty it. For bagged vacuum cleaners, you may need to replace the bag entirely. Always make sure you have replacement bags handy for this reason.
- For bagless vacuum cleaners, empty the container into a rubbish bin. It’s best to do this outside to avoid spreading dust and allergens around your home.
- After emptying the container, give it a quick clean to remove any remaining dust or debris. A damp cloth should do the trick, but make sure the container is completely dry before putting it back into the vacuum cleaner.
2. Check the Filters
Most vacuum cleaners have filters that catch fine particles of dust and allergens. Over time, these filters can become clogged, which can significantly reduce the suction power of your vacuum cleaner.
How to Fix:
- Locate the filters on your vacuum cleaner. The owner’s manual should provide information on where they are and how to remove them.
- Once you’ve found the filters, check if they’re dirty or clogged. If they are, you’ll need to clean them. Some filters are washable, while others need to be replaced. Check your owner’s manual for specific instructions.
- If you’re washing the filters, make sure they’re completely dry before putting them back into the vacuum cleaner. Using a wet filter can damage the vacuum cleaner’s motor.
3. Inspect the Vacuum Hose
A blockage in the vacuum hose can also cause a loss of suction. This is often the result of vacuuming up large items that get stuck in the hose.
How to Fix:
- Disconnect the hose from the vacuum cleaner and inspect it for blockages. You can do this by looking through it towards a light source. If you can’t see light at the end of the hose, there’s likely a blockage.
- If there’s a blockage, you’ll need to remove it. A long, thin pole or broom handle can be useful for this. Be careful not to puncture or damage the hose.
- If the hose is clear and the vacuum cleaner still has no suction, the hose itself might be damaged. Check it for any cracks or holes. If you find any, you’ll need to replace the hose.
4. Check the Vacuum Cleaner’s Settings
Some vacuum cleaners have different settings for different types of flooring. If your vacuum cleaner is set to the wrong setting, it may appear to have lost suction.
How to Fix:
- Check the settings on your vacuum cleaner. If you’re vacuuming a carpet, make sure it’s set to the carpet setting. If you’re vacuuming hard floors, make sure it’s set to the hard floor setting.
- If your vacuum cleaner doesn’t have specific floor settings, it may have a height adjustment. If the vacuum cleaner is set too high, it can lose suction. Try adjusting the height and see if that improves the suction.
5. Check the Belt and Brush Roll
The belt and brush roll of your vacuum cleaner can also affect its suction. If the belt is broken or the brush roll is clogged or not spinning properly, the vacuum cleaner may appear to have no suction.
How to Fix:
- Turn off and unplug the vacuum cleaner before checking the belt and brush roll.
- To check the belt, you’ll need to remove the bottom plate of the vacuum cleaner. The owner’s manual should provide instructions on how to do this. If the belt is broken or stretched out, it will need to be replaced. Get replacement belts here
- To check the brush roll, remove any hair or string that’s wrapped around it. If the brush roll is worn out or not spinning freely, it may need to be replaced.
Remember, always refer to your vacuum cleaner’s owner’s manual for specific instructions on maintaining and repairing your specific model. If you’ve tried all these steps and your vacuum cleaner still has no suction, it may be time to consult a professional.
At Yorkshire Appliances, we offer expert vacuum cleaner repair services. Our team of skilled engineers can diagnose and fix a wide range of vacuum cleaner issues, ensuring your appliance is back up and running in no time. We also stock a wide range of spare parts for various makes and models. Contact us today for all your vacuum cleaner repair needs.
As Amazon Associates, we earn from qualifying purchases. The links provided in this article are affiliate links, which means we may receive a commission if you make a purchase through these links. You are under no obligation to use these links when making a purchase.
Vacuum Cleaner Has No SuctionVacuum Cleaner Has No SuctionVacuum Cleaner Has No SuctionVacuum Cleaner Has No SuctionVacuum Cleaner Has No SuctionVacuum Cleaner Has No SuctionVacuum Cleaner Has No SuctionVacuum Cleaner Has No SuctionVacuum Cleaner Has No SuctionVacuum Cleaner Has No Suction